TV Mounts
Full Motion TV Wall Mount for 32-70" TVs up to 99 lbs
In stock — ships same day before 3pm
- Secure checkout
- 30-day returns
- 2-year warranty
- Ships same day before 3pm
Why it's useful
Home Theater · TV Mounting
Full Motion TV Wall Mount — Swivel, Tilt & Extend, 32–70"Pull your TV off the wall, angle it to your seat, and push it back flat when you're done. Dual articulating arms in cold-rolled steel hold up to 99 lbs, with a 3-step install that fits 12" and 16" wood studs.
Mounted in under 10 minutes
A 3-step process with a drilling template, so there's no guesswork on the wall.
- Included template — mark stud holes accurately before you drill a single hole.
- 3-step process — wall plate, TV bracket, then hang — most owners finish in under 10 minutes.
- Multiple screw sizes included — hardware is pre-sorted so the right screw for your TV is easy to find.
- Level included — get the wall plate straight before you commit to the studs.
Swivel and tilt to your seat
Full motion adjustment gets the screen pointed at you, not just at the wall.
- Swivel left or right — angle the TV toward your couch, kitchen island, or corner seating.
- Tilt down to cut glare — -12° down tilt reduces reflections from windows and overhead lights.
- +5° upward tilt — fine-tune the angle for mounts placed above eye level.
- Best for front-facing setups — tilt range suits standard living-room angles rather than steep, off-axis mounting.
Pull it out, push it flat
Dual articulating arms extend for viewing and retract for a slim wall profile.
- Extends up to 13.89" — pull the TV off the wall for a closer, more direct view.
- Retracts to 2.59" — push it back flat against the wall when you're not adjusting the angle.
- Dual articulating arms — move independently for smooth extension without binding.
- Space-saving profile — sits close to the wall in the retracted position, out of the way of foot traffic.
Cold-rolled steel, built to hold
Rated for up to 99 lbs, with the load-bearing structure to back it up.
- Cold-rolled steel construction — a rigid frame that resists flex under a heavy screen.
- Holds up to 99 lbs — rated for large 65–70" TVs, mounted securely into the studs.
- Reinforced load-bearing arms — designed to keep the TV steady through repeated swivel and tilt use.
- Anchored to studs, not drywall — install into 12" or 16" wood studs, concrete, or brick for full-rated strength.
Fits most 32–70" TVs
Wide VESA range and stud spacing cover most flat-screen setups.
- VESA 75×75mm to 400×400mm — covers the mounting-hole pattern on most 32–70" TVs.
- Fits 12" and 16" wood studs — also mounts to concrete or brick with the included hardware.
- Confirm before you buy — check your TV's size, weight, and VESA pattern against the mount's range.
- Works with popular models — fits many mainstream 65" sets without modification.
What's in the box
Everything needed to go from wall to mounted TV in one box.
- Wall mount bracket — dual articulating arms, pre-assembled where possible.
- Drilling template — mark your stud holes accurately before installing.
- Bubble level — confirm the wall plate is straight before you drill.
- Mounting hardware & multiple screw sizes — sorted for different TV back-panel thread sizes.
Specifications
- TV size range
- 32" – 70"
- Weight capacity
- Up to 99 lbs
- VESA compatibility
- 75×75mm – 400×400mm
- Material
- Cold-rolled steel
- Arm type
- Dual articulating (full motion)
- Extension
- 13.89" extended, 2.59" retracted
- Tilt
- -12° / +5°
- Swivel
- Left / right, adjustable to seat position
- Wall mounting
- 12" or 16" wood studs, concrete, or brick
- In the box
- Mount bracket, drilling template, bubble level, mounting hardware, multiple screw sizes
Install & use
Before you drill: confirm your TV's weight, screen size, and VESA hole pattern against the specs above. Use the included template to mark stud locations, then check with a level before securing the wall plate.
Stud-mounted only: this mount is rated for wood studs, concrete, or brick — not drywall alone. For concrete or brick, use appropriate anchors.
Tilt range note: the -12°/+5° tilt suits standard front-facing viewing angles rather than steep overhead or off-axis mounting positions.
Get your TV off the wall — and angled right.
Swivel it, tilt it, push it flat when you're done. A sturdy steel mount that installs in one afternoon.
Fit & compatibility
Not sure if this fits your setup? Send us your TV model before ordering.
Specifications
Full specification sheet coming soon.
What's in the box
Product, mounting/connection hardware, and quick-start guide as applicable.
Setup and care
Wipe with a dry microfibre cloth. Detailed setup guidance for this product will be published here.
Shipping and returns
Ships same day on orders placed before 3pm. Free shipping over $50. Return any unused item within 30 days — see our shipping policy for full details.
Warranty
Covered by a 2-year warranty against manufacturing defects. See the warranty page for what's included.
Full Motion TV Wall Mount for 32-70" TVs up to 99 lbs
$99.00
Pairs with
Complete your setup
TV Mounts
Universal Soundbar Mount Bracket — Up to 15 lb
Mount your soundbar directly above or below the television for a cleaner entertainment setup that moves with the screen. Flexible mounting Supports compatible soundbars weighing up to 15 lb (6.8 kg) Works with many fixed, tilting, and full-motion TV mounts Supports TV VESA patterns up to 600 × 400 mm Detachable extension plates provide multiple assembly positions Included Soundbar mounting bracket, extension plates, L-shaped mounting hardware, installation hardware, and instructions. Compatibility notice: Confirm the soundbar weight, mounting-hole type and spacing, TV VESA pattern, and available clearance before ordering. This bracket may not fit every soundbar or televisions over 83 inches.
TV Mounts
Wall-Mount Setup Kit
Ref BND-01 3-Piece Bundle Mount + Cable + Raceway 32–70" TVs Home Theater · Complete Setup Bundle TV Mount + HDMI 2.1 Cable + Cable Raceway Kit One order gets your TV on the wall, connected at full 4K/8K speed, and wired clean with no cords hanging down the drywall. A full motion mount, a certified 48Gbps HDMI 2.1 cable, and a paintable raceway kit to hide the run — everything you need for a finished, showroom-clean install. 01 Full Motion TV Mount + 02 HDMI 2.1 Cable, 48Gbps + 03 Paintable Cable Raceway Complete Bundle 00 Why buy it as one kit Three parts that are normally bought separately — and normally forgotten separately, too. This bundle solves the whole job in one checkout. Mount the TV Full motion Swivel and tilt it to your seat, up to 99 lbs. Connect it right 48Gbps HDMI 2.1 Certified for 4K@120Hz and 8K@60Hz — no bottleneck. Hide the cords Paintable raceway 290" of channel to route and disappear the cable run. Finished, cable-free install Setup Piece 01 · TV Mount 01 Full motion mount, 32–70" Swivel, tilt, and pull the TV toward you — then push it flat when you're done. Fits 32–70" TVs up to 99 lbs — covers the vast majority of living-room and bedroom TVs. Max VESA 400×400mm — matches the mounting-hole pattern on most mid-to-large flat screens. 6 articulating arms — robot-welded steel construction for a rigid, non-flexing hold. Swivel left or right — angle the screen to your couch, kitchen island, or corner seating. 6-arm full motion design Motion Piece 01 · TV Mount 02 Pull it out, tilt down the glare Extension and tilt working together for a genuinely adjustable viewing angle. Extends to 17.5" — pull the TV well off the wall for a closer view. Retracts to 3.4" — push it back flat against the wall when not in use. Tilts up 5° / down 15° — angle downward to cut glare from windows and overhead lights. ±3° post-install leveling — fine-tune the TV level after it's already on the wall. Extend 17.5" · retract 3.4" Reach Piece 02 · HDMI 2.1 Cable 03 48Gbps HDMI 2.1, certified The cable that actually keeps up with a modern TV, console, or streaming box — not a cable that quietly caps your picture. 48Gbps bandwidth — HDMI 2.1 certified, well beyond the 18Gbps ceiling of standard HDMI 2.0 cables. Supports 4K@120Hz and 8K@60Hz — handles the highest resolutions and refresh rates current TVs and consoles output. Dolby Vision HDR — passes the full HDR signal for accurate color, contrast, and brightness. Double-layer shielding — protects signal integrity and the cable itself from everyday wear. 48Gbps HDMI 2.1 connector Cable Piece 02 · HDMI 2.1 Cable 04 Built for gaming and streaming 6.6ft is the right length for most wall-mount setups, and it's rated for the devices people are actually plugging in. 6.6ft / 2M length — reaches comfortably from a wall-mounted TV down to a console or streaming box. PS5 & Xbox Series X ready — delivers the full bandwidth modern consoles need for high-res, high-refresh gaming. Works with Apple TV 4K & streaming devices — passes 4K HDR content without compression artifacts. Motion-blur reduction — high refresh-rate support keeps fast motion clean and sharp. 4K@120Hz · 8K@60Hz Spec Piece 03 · Cable Raceway 05 Hide the run, keep it paintable 290" of channel — enough to route a wall-mounted TV's cables from the mount down to an outlet or media console, out of sight. 290" total length — 20 pieces at 14.6" each, enough to plan a full vertical or horizontal run. Self-adhesive install — peel and stick to the wall, no drilling required for the channel itself. Paintable white PVC — paint it to match your wall color so it disappears completely. Snap-on cover — tuck cables inside and close the channel for a clean, finished line. Paintable, self-adhesive raceway Raceway Piece 03 · Cable Raceway 06 20 pieces, cut to plan your route Pre-cut lengths mean less measuring and cutting, more sticking and done. 20× 14.6" sections — combine pieces to reach from the mount to your outlet or console. Corner & connector pieces included — route around corners without an awkward gap. Trim to fit — cut individual sections shorter for tight runs or odd wall layouts. Works with any cable — power cords, HDMI, Ethernet, or speaker wire all fit inside the channel. 20-piece raceway kit Kit 07 What's in the bundle Everything to go from bare wall to a finished, wired TV setup in one order. Mounting Dream full motion TV mount — bracket, drilling template, hardware in pre-labeled bags, Allen key. Belkin HDMI 2.1 cable, 6.6ft — one certified 48Gbps cable ready to connect your source device. YesBes 290" cable raceway kit — 20 channel pieces, connectors, and adhesive backing. Everything needed for a clean install — no separate trips or add-on purchases required. Complete bundle contents Included 08 In your space The result: a wall-mounted TV that looks like it was professionally installed. Living room installation Space Mount, connect, conceal Steps 09 Specifications 01 · TV Wall Mount — Mounting Dream MD2380 TV size range 32" – 70" Weight capacity Up to 99 lbs Max VESA 400×400mm Arms 6-arm full motion, robot-welded steel Extension 17.5" extended, 3.4" retracted Tilt +5° up / -15° down Leveling ±3° post-installation Wall mounting 16" wood studs (not for drywall alone; concrete anchors available on request) 02 · HDMI 2.1 Cable — Belkin Ultra HD Length 6.6 ft / 2M Bandwidth 48 Gbps, HDMI 2.1 certified Resolution support 4K@120Hz, 8K@60Hz HDR Dolby Vision Shielding Double-layer Compatibility PS5, PS4, Xbox Series X, Apple TV 4K, laptops, PCs 03 · Cable Raceway — YesBes 290" Kit Total length 290" (20 pieces × 14.6") Channel size 0.95" W × 0.55" H Material Paintable PVC Install Self-adhesive, peel and stick Color White (paintable to match any wall) 10 Install & use Suggested order: mount the bracket into wood studs using the included template, hang the TV, connect the HDMI 2.1 cable to your source device, then route the cable through the raceway from the mount down to your outlet or console. Studs, not drywall: the mount is rated for 16" wood studs; drywall alone will not support the rated weight. Use concrete anchors (available on request) for masonry walls. Raceway finish: the channel is paintable — for the most seamless look, paint it to match your wall color after installation and before adding the cables. One order. A finished wall. Mount the TV, connect it at full 4K/8K speed, and hide every cable — all three pieces, one checkout. Add bundle to cart
Save 20%Smart Home Security
Ring Battery Doorbell Plus – Satin Nickel
See visitors and packages from head to toe The Ring Battery Doorbell Plus gives you a wider, taller view of your front door with 1536p Head-to-Toe HD+ video. Check visitors, speak through the Ring app and monitor deliveries from almost anywhere—all with flexible battery-powered installation. More visibility at your front door Head-to-Toe HD+ video: A 150° horizontal and 150° vertical field of view helps capture visitors as well as packages placed near the ground. 1536p video: View clearer details in Live View and supported recordings. Color Night Vision: See more useful detail after dark when conditions allow. Two-Way Talk: See, hear and speak with visitors from the Ring app on a compatible phone or tablet. Motion detection and privacy zones: Customize monitored areas and reduce alerts from places you do not need to watch. Works with Alexa: Hear supported alerts on compatible Echo devices or view the front door on compatible Echo Show, Fire TV and Fire Tablet devices. Convenient power and installation Quick-Release Battery Pack: Remove the included rechargeable battery for easier charging without taking the entire doorbell off the wall. Flexible power options: Use the included battery, connect to compatible existing 8–24 VAC doorbell wiring for trickle charging, or use supported Ring power accessories sold separately. Simple setup: Connect through the Ring app and mount using the included installation tools and corner kit. Key specifications 1536p Head-to-Toe HD+ video 150° horizontal and 150° vertical field of view Color Night Vision Two-Way Talk and Live View 2.4 GHz Wi-Fi connectivity Approximate dimensions: 5.1 × 2.4 × 1.1 inches / 128 × 62 × 28 mm Operating range: -5°F to 122°F / -20.5°C to 50°C Satin Nickel faceplate What is included Ring Battery Doorbell Plus Rechargeable Quick-Release Battery Pack Satin Nickel faceplate Corner kit USB charging cable Installation tools User manual and security sticker Subscription disclosure Basic Live View, motion notifications and Two-Way Talk are available without purchasing a Ring Protect plan. Package and person alerts, recorded video history, video replays and certain advanced features require a compatible Ring Protect subscription sold separately. Feature availability may vary by region and plan. Ring, Alexa, Echo and Fire TV are trademarks of their respective owners.
Works with Ring app, 2.4 GHz Wi-Fi networks, Compatible Echo devices
Save 22%Smart Home & Displays
Amazon Echo Show 8 (Newest Model) – Graphite
A smarter home centerpiece with a vibrant 8.7-inch HD display The newest Amazon Echo Show 8 combines a redesigned HD touchscreen, room-filling spatial audio and Alexa+ support in a compact smart display. Its AZ3 Pro processor, built-in smart-home hub and Omnisense technology make it a practical control center for entertainment, calendars, recipes, camera feeds and everyday routines. Why Echo Show 8 stands out Vibrant 8.7-inch HD touchscreen: Enjoy 15% more viewing area than the 2023 Echo Show 8 for recipes, calendars, camera feeds, photos and supported streaming services. Room-filling spatial audio: Dual full-range drivers and a 2.8-inch woofer deliver clearer vocals, a wider soundstage and deeper bass for music, podcasts and entertainment. Fast, responsive performance: The Amazon AZ3 Pro processor supports smooth navigation and advanced Alexa experiences. Built-in smart-home hub: Pair and control thousands of compatible lights, thermostats, locks, cameras and other devices without adding a separate hub. Omnisense-powered routines: Trigger supported routines using temperature, presence or Visual ID detection. Natural video calls: A centered 13 MP camera provides auto-framing, up to 3.3× zoom and noise reduction for clearer conversations. Photos at a glance: Turn the home screen into a slideshow of supported photo memories when the device is not in active use. Alexa+ ready: Designed for more natural conversations, smarter planning, recipe discovery, shopping lists and compatible smart-home routines. Privacy controls Use the dedicated microphone and camera enable/disable button to disconnect them when desired. Additional camera controls are available on the device and through supported app settings. Key specifications 8.7-inch HD touchscreen 800 × 1340 display resolution 13 MP camera with auto-framing Dual full-range audio drivers 2.8-inch woofer with spatial audio Approximate dimensions: 8.2 × 5 × 5.9 inches Approximate weight: 37 oz / 1,049 g Graphite finish Good to know Alexa+, video calling, camera viewing, streaming, photos and smart-home functions require compatible devices, services, accounts or subscriptions and may vary by region. A compatible Wi-Fi connection and the Alexa app are required for setup. The optional stand shown in some images is sold separately and is not included. Amazon, Alexa, Echo, Ring and Amazon Photos are trademarks of their respective owners.
Works with Alexa app, Amazon Photos, Compatible Echo devices